Advantages of biaxial gravity free mixer of dry mortar production line：

1, can run solid-solid (powder and powder) mixing, solid-liquid (powder and liquid) mixing and drying operations, can also be used as reaction equipment, in addition, we can according to your requirements for special design and processing.

2, the material in the machine by the mechanical action and in the state of weightlessness, widely staggered convection, diffusion, so as to achieve uniform mixing, suitable for mixing the material range is very wide, the proportion, particle size and other physical properties of the material mixed without segregation. The weakness of some mixers is overcome and the high precision mixing is obtained.

3, high mixing precision, solid - solid mixing in 1:1000 ratio, the standard deviation of 3 to 8 100,000, content of passive error & LT; 2% (variation factor).

4, even if the material has specific gravity, particle size difference, in the staggered layout of the stirring blade rapid and violent churning and throwing, can also achieve a good mixing effect.

5. The discharging form is generally pneumatic (manual) turning valve, arc valve is closely embedded in the cylinder, flush with the inner wall of the cylinder, no material accumulation and mixing dead Angle phenomenon; The standard type is divided into big door and small door. The big door is opened to the barrel edge, and the feeding material is clean and fast, and the residue is less.

6. The gap between the blade and the cylinder wall directly affects the mixing effect and the material residue in the body after discharging; The gap between the blade and the cylinder is controlled at 3-5mm.

7, the mixing speed is fast, the general powder mixing only takes about 3-5 minutes.

8, low energy consumption, is the best choice of general mixture.

9, can be closed operation, reliable operation, convenient maintenance.