Daily maintenance and fault handling of bucket elevator in automatic dry mortar production line

The bucket elevator in the dry mortar mixing equipment is suitable for lifting from low to high. After the supply material is put into the hopper through the shaking table, the machine automatically and continuously runs upward. According to the transfer volume can adjust the transmission speed, and on demand to select the lifting height, hopper for their own design and manufacturing, PP non-toxic hopper to make the type of bucket elevator more widely used, all sizes are designed and manufactured in accordance with the actual needs, for supporting vertical packaging machine, computer metering machine design, suitable for food, medicine, chemical industrial products, screws, nuts and other products to lift feeding, The automatic stop and start of the machine can be controlled by the signal recognition of the packaging machine.

Bucket elevator is a series of hopper uniformly fixed on the tractive component, vertical lifting material continuous conveying machinery. Divided into ring chain, plate chain and belt three.

1. When making the pit foundation, it is necessary to make waterproof treatment to ensure that the pit is dry.
2. The bucket lifting base must be cleaned every three days.
3. Periodically check the tightness of the belt and the flow of the winnowing hopper every week, and adjust in time if any exception occurs.

Troubleshooting: If abnormal sound is detected, stop the machine in time
1. When the bucket is running away, put a higher pad on whichever side you prefer.
2. Check the circuit, motor and reducer.
3. Clean the bucket lift base
4. Check the bearing
5. Check if the belt vent is damaged or large pieces are stuck

Contact us：

whatsapp/TEL:+8615137127837

E-mail： [email protected]