Simple dry mortar production line
This is a set of dry mix jointing mortar production line , (The color of the equipment can be customized according to customer's requirement.) The whole equipment consists of ribbon mixer,screw conveyor,finished warehouse ,electric control cabinet,air compressor,packing machine.
Simple dry mortar production line series equipment production line, mainly consists of spiral feeding machine, ribbon mixer, finished product silo, packaging machine, dust collector, electric control cabinet, air compressor, electric control cabinet system. Large proportions of raw materials, such as cement, can be manually measured through the spiral feeding machine into the Ribbon mixer. Small proportions of valuable master materials, such as cellulose and rubber powder, can be measured into the Ribbon mixer through an electronic scale, and finished products can be put into the finished product warehouse. Finally, the products can be automatically measured and packaged through the valve pocket packaging machine or open pocket packaging machine.
YS2000 type raw materials weighing blend equipment configuration list
1.Feeding machine 3set
2.2tons per batches mixer 1set
3. weighing system 1set
4.second screw conveyor 1set
5. finished production silo 1set
6.valve mouth packing mcahine 1set
Equipment advantage
1. three set raw materials feeding machine ensure feeding raw materials speed
2.mixer is ribbon type mixer , it is very efficient. 5-8minuter can blend materisl evenly
3. Under mixer have weighing system ,weighing system is using for raw materials dosing weighing
4.secong screw conveyor and finished production silo is using for product storage
5. packing machine is using for product pack, valve mouth bag is suitable for packing mcahine ,8seconds can complete 25kg bag pack
Entire plant need 2-3 worker ,and can produce 5-6tons product per hour ,Whole set plant weight is 4 tons ,occupy space is L 6.8M width 2.9M height is 3.2M
Maintenance
Replace gearbox oil annual and fill grease in bearing per weak , clean dust of motor and reducer and packing machine , drain water of air compressor everyday
we have sent some spare parts for free ,such as hose of pcaker / solenoid valve /bearing /impeller of packing machine
Using
open mixer and open feeding machine , start to feed raw materials . blend 5-8 minuter ,open second screw conveyor and open discharged valve , materisl go
into silo ,start to pack
Attention
When mixer have materals ,mixer can not stop run ,Suppose electric power turn off suddenly , dont start mixer at once ,must unload materisl from mixer bottom gate ,and then open mixer
Related parameters of dry mixing mortar production line
Model | Capacity | Mixing time | Total power | Worker required |
YS-500 | 1-2T/H | 15-20min/batch | 17.5kw | 2-3workers |
YS-1000 | 2-4T/H | 15-20min/batch | 19.5kw | 2-3workers |
YS-2000 | 5-6T/H | 15-20min/batch | 24kw | 2-3workers |
YS-3000 | 6-8T/H | 15-20min/batch | 28kw | 2-3workers |
1 | Masonry mortar | 4 | Ceramic tile adhesive mortar |
2 | Floor mortar | 5 | Concrete masonry mortar |
3 | Tile group |
1. Use the crane to load the equipment into the container
2. Equipment packaging plastic film, waterproof
3. Wood packaging for vulnerable equipment, which is prohibited from impact
4. Instructions for installing the instruction cabinet
Contact us
Whatsapp:+8615137127837
WechatID:+8615137127837
Email:[email protected]
Alibaba Store:
https://zzyishang.en.alibaba.com