Dry mortar production line introduction
2022-08-19
The components of dry mortar production line include: hoist conveyor, premix silo, small silo, mixer, finished silo, packing machine, dust collector, electric control cabinet, gas phase balance system.
The classification of dry mortar production line includes: simple type, semi-automatic type, automatic type .
1) Simple dry mortar production line: mainly composed of gravity mixer, dry powder bin, packaging screw, etc. The production line has low investment and high efficiency, but the output is low, and the labor consumption is especially large, and the working environment contains high dust, which is suitable for the initial investment purchase.
2) semi-automatic dry mortar production line: mainly composed of gravity mixer (with flying knife), finished product bin, packaging machine, bucket elevator, to be mixed bin, dust collector, air pressure system, control system, etc. The production line IS MORE INVESTMENT than the simple type, but high output, good working environment, and good scalability, suitable for most investors to buy.
3) Automatic dry mortar production line: automatic type is mainly composed of efficient mixing system, material storage system, conveying system, lifting system, weighing system, mixing system, packaging system, dust removal system, material level control system, alarm system, air pressure system, machine control system, etc. In areas where commercial sand is scarce, crushing system, screening system and drying system can be added. The production line has large investment, one step in place, high investment risk, but high rate of return, suitable for building in large and medium-sized cities with good wall insulation foundation.
The above is a simple introduction of dry mortar production line. Here's how it works.
A pair of relative rotation of the spindle drive the blades rotating, the material in a certain Angle to the space level, particle flow layer to instant weightlessness in space, the centrifugal force and gravity offset (weightlessness material density difference influence on the mixing uniformity without), mixed with each other in the region, in the middle level form a fluidized floating zone, A rotating vortex is formed around the main axis. A material translation flow layer is formed at the bottom, and the material moves along the axis and axial direction at the bottom. Material in the radial force and axial force under the dual drive, a three-dimensional composite motion, so as to form a comprehensive compound cycle, quickly achieve the purpose of uniform mixing.
The finished product mixed in the mixer is quickly opened by pneumatic, and quickly put into the finished product bin for buffer and storage. Product bin and packaging machine through soft connection into the packaging machine measurement, packaging. For users with large output, belt conveyor can be added to the rear process of the packing machine to transport the finished product directly to the finished product area or truck.
Whatsapp:+8615137127837
WechatID:+8615137127837
Email:[email protected]
Alibaba Store:
https://zzyishang.en.alibaba.com