In the construction of the construction project, we are in the field will be mixed with all kinds of raw materials and then water mixing, or mixing truck transportation, so that the production of mortar is not only small but also different batches of raw material properties have some differences, seriously restrict the development of building materials industry; Since the advent of dry mortar equipment, dry mortar has not only been produced in large quantities but also solved the impact caused by the different proportion of each batch of materials, so it has been widely praised by the relevant people in the market.

Dry mortar mixing equipment with an annual output of 200,000 tons is mainly used to process and produce dry mortar and has become an indispensable part of the development of building materials industry, and continues to bring excellent raw materials for the development of building materials industry. The rapid development of current construction engineering is closely related to the convenience provided by various aspects in the market, such as the convenience provided by dry mortar equipment.

The wide application of dry mortar equipment in various projects not only improves the phenomenon of dirty and messy construction site and unstable soil of mortar construction performance, but also significantly improves the construction efficiency of the project and fundamentally ensures the construction quality of the project.

Dry mortar production line bears the production task of enterprise dry mortar, how to operate dry mortar equipment will determine the production efficiency of dry mortar, but also affect the survival and development of the whole dry mortar enterprise. Therefore, we must be familiar with their dry mortar equipment, to constantly sum up experience in the production process, and constantly improve the production efficiency of dry mortar equipment, especially to understand the use of dry mortar equipment matters needing attention.

1. Discharge port, pipe and valve of dry mortar equipment shall be cleaned in time after packaging and before material replacement. If dry mortar is not cleaned in time after packaging, it is very easy to cause pneumatic actuator parts to be bonded or even stuck by dry mortar. When carrying out the next packaging, the packaging equipment can not be packaged again or the reaction is very insensitive, but also can not ensure the accuracy of packaging measurement.

    

2. Ensure that the appearance of the dry mortar equipment is clean and tidy. In the process of using the dry mortar packaging equipment, if the dry mortar splashing and dust deposition are not cleaned in time, it will cause pollution to the surface of the packaging machine and affect the appearance. The deposited dry mortar may cause the measuring parts to jam or malfunction, resulting in reduced packaging accuracy.

Dry mortar mixing plant  bears the heavy burden of site mortar production, only the operation equipment can improve the production efficiency of dry mortar equipment. It also speeds up the project. All, we should have enough understanding and understanding of dry mortar equipment, and constantly sum up experience in practical operation to improve the production efficiency of equipment. The following points should be paid more attention to.

Dry mortar equipment in the formal work, to empty machine operation, before running noseblood pump, reducer, ingredients weighing bucket, bucket lifting machine, double shaft mixing machine, finished warehouse reducer, air compressor and other components of the equipment for refueling. Ensure adequate lubrication capacity of equipment. Switch on the power supply of all equipment and debug it one by one. Make preparations for production. When the fighter elevator, air compressor, dust collector, open the start of the working ingredients, will be equipped with the material hopper to be lifted to the bin. After starting the biaxial weightless mixer for 3-5 minutes, start the motor of the finished product warehouse, open the valve of the biaxial weightless mixer and put the material into the finished product warehouse for packaging.

So that's how you operate the device. But the following points we should pay more attention to check.

The discharging port of dry mortar equipment should be cleaned in time after packaging and replaced with materials. If the dry mortar is not cleaned in time after the completion of the guarantee, it is easy to glue or even jam the pneumatic actuator parts by the dry mortar again. When carrying out the next packaging, the packaging equipment can not be packaged again or the reaction is very insensitive, but also can not ensure the accuracy of packaging measurement.

To strengthen the maintenance of the compressed air pressure regulating valve of dry mortar equipment, it is necessary to refuel it regularly, because the lack of oil in the compressed air pressure regulating valve will lead to poor movement of the driving cylinder, affect the execution of the controller command, resulting in errors in the measurement accuracy and even the misaction of the executive cylinder. The work of dry mortar equipment is inseparable from the operation of operators

1. Drying and storage of drying materials of dry mortar equipment must be done

The moisture content of sand in fine aggregate shall be less than 0.5 percent after drying, and that of other playable aggregate shall be less than 1.20%. Use grading screen to store in different special silos according to different particle size grades and ensure that the particles are all.

All raw materials are stored in a dedicated channel and clearly marked.

2. Accurate measurement of dry mortar equipment

Measurement talent quality method measurement measurement allowable error should be met.

The measuring equipment shall have the qualification certificate issued by the legal measuring unit.

Measuring equipment must meet the production of different kinds of dry mortar equipment.

3. Dry mortar equipment should be evenly mixed

Dry mortar production line is controlled by computer program.

The dry powder shall be mixed by mechanical forced stirring to ensure that all components are evenly and uniformly mixed.

The mixing and transporting equipment must be cleaned up when the variety is changed.