Thermoplastic road marking paint mixer

Yellow and white hot-melt reflective thermoplastic road marking paint mix machinery production line

Product Description

thermoplastic road marking paint mix machinery production line

thermoplastic road marking paint mix machinery

1. Yellow and white hot-melt reflective thermoplastic road marking paint mix machinery production line is fast speed mixing , stir with multi-layer spiral belt , overall movement of materials, high speed and high yield, the average mixing time is 5-10 minutes.

2. Multi-usage, can produce solvent at room temperature, heating solvent traffic coatings road marking paint, hot melt type reflective road marking paint, spike type vibration reflective marking paint, water-based reflective road marking paint, etc

3. Low maintenance rate, bearing on both ends of the mixer, materials are not easy to enter, equipped with reducer and maintenance rate.

4. High mixing uniformity, multidirectional movement of materials, multi-layer spiral belt, stirring without dead Angle, high uniformity and good quality;

5. Small footprint, automatic feeding device, improve work efficiency.

6. U-type/O type tube structure, stable operation, low noise, long service life and wide application scope;

7. Use the inner and outer layers of the inner shell to bring back stirring, no dead Angle, fast mixing speed and high evenness;

8. The marking paint mixer adopts the screw lifting/gladiator to raise the material, the feeding port and the ground level are smooth, the feed is convenient;

Product details

The mixer is mainly composed of spiral feeder, ribbon mixer, oil filling pipe, oil filling system and pneumatic valve mouth packing machine

thermoplastic road marking paint mix machinery

Product advantage

1. Good dispersion: the design of spiral ribbon structure is adopted in the marking paint mixer, which can effectively disperse various raw materials and completely solve the problem of segregation caused by the different proportion of materials.

2. Wide application: the marking paint mixer can meet the production of different marking coatings

3. The equipment investment is less, the benefit is high, and it avoids the idle and waste of equipment caused by over-investment.

4. The equipment is simple to use convenient, reticule coating mixer has the cover an area of an area small, low energy consumption, easy operation, without foundation can be installed directly use of the advantages of production 2-8 tons per hour, operators 2-3 people.

company service

Pre-sales service:
Design - discuss (email/phone/chat tools) - provide solutions - access invitations and receptions - create major trust - contracts;
Sales service:
Send confirmation design and foundation drawings to customers;
Provide customers with photos and videos of the production process;
Pre-assemble the main components of the machine and test them;
Draw color and logo according to customer's requirement;
Arrange customers to check the finished products;
Pre-order logistics locations to ensure on-time delivery.
Monitor the loading and packing machine in the container, such as the packing of wooden cases, steel wire reinforcement.
After-sales service:
Tracking ship and estimated date of arrival;
Send all necessary documents and assist to retrieve the goods smoothly;
Dispatch experienced engineers to installation and commission, training;
Regular learning of equipment operation;
Remote control is readily available;
Guarantee: 12 months;
Spare parts: sent by DHL/fedex/TNT.

< Prev page Next page >